Publicidad
Idiomas disponibles
Idiomas disponibles
EN
22 5/8" (57.4 cm)
A
22 13/16" (58.0 cm)
19 1/4" (49.0 cm)
B
19 9/16" (49.7 cm)
24" (60 cm) min
C
D
18" (45.7 cm) min Height from countertop to nearest cabinet on either side of until
30" (76.2 cm) min. (see note*) Clearance from countertop to unprotected overhead surface
E
2" (5 cm) Clearance from cutout to side wall on the left and right of the until
F
13" (33 cm) Depth of unprotected overhead cabinets
G
IMPORTANT:
Under the cooktop it is necessary to install a partition as shown in figure2-3.
* NOTE:
- 24" (61 cm) min. clearance if bottom of wood or metal cabinets is protected by not less than 1/4" (0.6 cm) flame retardant
millboard covered with no less than No. 28 MSG sheet steel 0.015" (0.04 cm) stainless steel, or 0.024" (0.06 cm) aluminum
or 0.020" (0.05cm) copper.
- 30"(76.2 cm) min. clearance between top of cooking platform and bottom of unprotected wood or metal cabinet.
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate to
prevent damage from chipping.
2. Radius corners of cutout and file to Insure smooth edges and
prevent corner cracking. Recommend 1/4"or 3/8"diameter
drill In each corner.
3. Rough edges, inside corners which have not been rounded
and forced fits can contribute to cracking of the countertop
laminate.
4
CUTOUT REQUIREMENTS
FIGURE 3 -
G
F
24" (60 cm)
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 93° C (200° F)
C
E
D
30" (76.2 cm)
28 11/16" (72.9 cm)
28 15/16" (73.5 cm)
19 1/4" (49.0 cm)
19 5/8" (49.8 cm)
30" (76.2 cm) min
This cooktop has been designed with wide tolerances of cut-
out to cover possible replacement with other brands. We
recommend to that you consider the minimum dimension of cut-
out size In the case of new Installation.
Some cut out sizes for possible replacements:
Dim.
Inches
24"
22 13/16" x 19-9/16"
30"
28-15/16" x 19-9/16"
cm
58,0 x 49,7
73,5 x 49,7
Publicidad
