Publicidad
STEP 7
Carefully turn the unit onto its front side.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
8
(x42)
H
B
Raw
Surface
Flush the edge of the back panel with the bottom edge of
the bottom shelf (D).
Align squarely and nail straight through into back edges.
14
8
D
You
Tube
Publicidad
