Greencut GE200XE Manual De Instrucciones página 62

62
MAINTENANCE
ATTENTION: Make sure the engine is switched off before performing any maintenance or repair
work. This will reduce any potential risk.
MAINTENANCE PROGRAM
MAINTENANCE
Engine oil
Engine oil filter
Check screws/bolts
Carburettor drain
plug
Air filter
Fuel filter
Spark plug
Empty/Clean the fuel
tank
Fuel line
Adjust idle speed
Evacuation valve
Cylinder head
coverage
Clean the combustion
chamber
NOTE: In harsh conditions such as operating in high temperatures, with higher than normal loads
and with dust, it will be necessary to reduce the service intervals.
EVERY MONTH
EACH USE
OR 15H. USE
Check Replace
Check
Check
Check
Check
EVERY 3
EVERY 6
MONTHS
MONTHS OR
OR 30H. USE
60H. USE
Replace
Clean / Replace if necessary
Check Replace
Check Replace
Replace if necessary
EVERY 12
MONTHS OR
100H. USE
Carry out
Adjust
Adjust
Check
Carry out if
necessary