Prolinx D1 Manual Del Usuario página 5

Connect
Connect Camera to APP
Important to Know:
①
Before adding the device, make sure that your camera has enough power.
You can use 5V,1.5A charging adapter to charge it (power adapter is not
included)
②
Long press the 'Power button' for 3-5s to power on/off the device, you
will hear a beeping sound after turning it on.
③
If you have successfully pair the camera with you phone, the 'Status Light
will flash blue. If not, it will show red light. Please reset the camera by
pressing 'Reset' button for 3-5s.
Step 1: Run 'CloudEdge' APP, click 'Add Device'.
Step 2: Select your Wi-Fi, and input the right password, and click 'Next'
Step 3: Show QR code to the camera at distance of 5-8 inches. A tone will
be heard when successfully scanned.
Step 4: You can name your camera and add it in a monitor location.
3
001