Publicidad
Idiomas disponibles
Idiomas disponibles
44
-
Worry about always keeping your hands warm.
-
Make sure that the chain is always sharp.
-
Take frequent breaks.
-
Always hold the machine firmly by the handles.
•
If you notice any of the symptoms of white finger disease, see your doctor immediately.
RESIDUAL RISK FACTORS
•
Risk of injury to the skin and other parts of the body from projections of objects. This machine generates an
electromagnetic field during operation. This field may, in some circumstances, interfere with active or passive
medical implants. To reduce the risk of serious or fatal injury, people with medical implants should consult their
doctors and the implant manufacturer before using this machine.
WORK AREA SAFETY
•
Do not use the machine in extreme temperatures.
•
Keep the machine away from excessive moisture.
•
Do not use this machine in explosive atmospheres in the presence of flammable liquids, gases and dust.
•
Keep the work area clean and well lit. Cluttered, dark areas can cause accidents.
•
Remove all objects from the work area before turning on this machine. Objects near the product may be touched
and projected by the machine causing personal injury.
•
Keep children, people, or animals away while operating this machine.
•
When work is performed simultaneously by two or more people, always check the location of others and
maintain a sufficient distance to ensure safety.
•
Remember that the machine operator is responsible for hazards and accidents caused to other people or things.
Under no circumstances shall the manufacturer be liable for damage caused by improper or incorrect use of this
machine.
ELECTRICAL SAFETY
•
The tool plug must match the outlet.
•
Never modify the plug in any way. Unmodified plugs and matched bases will reduce the risk of electric shock. If
you discover any damage, send your machine to the Official Technical Service.
•
Do not use cable to carry or lift. Keep the cable away from heat, oil, sharp edges, or moving parts. Damaged or
tangled cables increase the risk of electric shock.
•
When not in use or before cleaning and servicing, disconnect the tool from the power supply.
•
Store the tool in a dry place between 10ºC and 30ºC when not in use.
•
Avoid contact of the body with a grounded surface.
•
When operating the tool outdoors, use an appropriate wiring extension.
•
Do not expose the tool to rain or moisture.
MAINTENANCE, TRANSPORTATION AND STORAGE SAFETY
•
Keep cutting tools sharp and clean. Well maintained cutting tools with sharp cutting edges are less likely to jam
and are easier to control.
•
Do not modify product controls.
•
Check regularly for broken parts or other conditions that may affect the proper operation of the machine.
•
Replace worn or damaged parts immediately with original spare parts only.
•
Carry out regular maintenance on the machine. Do not attempt any maintenance or repair work not described
in this instruction manual. We recommend that maintenance and repairs not described in this manual are carried
out by the Official Technical Service.
Publicidad
