Before you call for service...
Troubleshooting Tips
Problem
No Water
Leaks at fittings
Sounds you may hear
Possible Causes
Water supply valve
not turned on.
After filter change,
tank is empty.
Improperly installed.
Sink drain, drain water
from system.
flowing through the faucet
air gap. This may be associated
with high pressure water supply,
generally 80 psi or greater.
What To Do
water to fill the tank.
Installation Instructions.
such as a basement drain. See pages 16 and 17
for alternative drain configurations.
system to reduce the pressure below 80 psi.
installations is available from GE (see item #31 on the
parts list, page 25). Contact GE Parts and ask for Flow
Restrictor, High Pressure, Part Number WS15X10049.
GEAppliances.com
23