Sauder Orchard Hills Serie Instrucciones De Montaje página 7

Step 2 Step
Fasten three ANGLE BRACKETS (NN) to the LEFT END (B2).
å
Use three GOLD 9/16" LARGE HEAD SCREWS (AAA).
Fasten the END MOLDING (R) to the ANGLE BRACKETS (NN).
å
Use three GOLD 9/16" LARGE HEAD SCREWS (AAA).
NOTE: There are no pre-drilled holes in the END
å
MOLDING (R). The SCREWS will tighten into the groove.
These edges must be even.
www.sauder.com/services
R
B2
GOLD 9/16" LARGE HEAD SCREW
402174
Remember:
Righty tighty.
Lefty loosey.
NN
AAA
(6 used in this step)
Page 7