• Extend the hose to the desired length, then pass the other end of
the hose through the window to allow air to escape to the
outside.
• Installation with the window slide kit:
Depending on the size of your window, adjust the size of the window slider kit;
If the window height requires two window slides, use the bolt and nut to secure the window slides
once they are set to the proper length.
Remark :
The flexible hose can stretch 30-150cm as needed.
This length was set according to the specifications of
the air conditioner. Do not use an extension or any
other hose other than the one supplied, as this could
affect the correct operation of the appliance.
• Air must be able to circulate freely, any obstruction
could cause the air conditioner to overheat. Make sure
the hose does not twist or bend.
EN-17