YATO YT-85179 Manual Original página 15

EN
from the power supply by disconnecting the batteries. Next, proceed with maintenance.
Turbo function (VI)
During blower operation, it is possible to increase the blowing capacity to maximum by using the turbo function. This function
should only be used briefl y, for a maximum of 30 seconds, only if the airfl ow in normal operation is insuffi cient. The turbo function
operates independently of the currently set blow strength. To use the turbo function, the blower must be activated. The turbo func-
tion cannot be activated until the machine has reached full speed for normal operation. Then press and hold the turbo button on
the control panel. Releasing pressure on the turbo button will allow the machine to return to normal operation.
PRODUCT MAINTENANCE AND STORAGE
Whenever work is completed, disconnect the batteries from the product and proceed with maintenance. Ensure that the device is
unplugged. Remove the nozzle. Hold the blower air duct with one hand. With the other hand, remove the nozzle by turning it clock-
wise until the components are loose and disconnected. Then remove the air duct. Press and hold the pipe lock button, pull the
pipe off the blower. Do not remove the nozzle by force or with tools to avoid damaging the unit. Clean both the ventilation openings
and the inlet and outlet with a soft handheld brush or a painting brush with plastic bristles. Clean the housing, handle, and controls
with a soft, slightly dampened with water cloth and then dry them. Do not immerse the machine in water or any other liquid. A
compressed air stream with a pressure not exceeding 0.3 MPa can be used for cleaning. Once the nozzle is removed, it can be
cleaned with a jet of water and then dried or left to dry. Do not use sharp objects, abrasives, solvents, or alcohol for cleaning.
Product storage
Store the product disassembled. The storage area should guarantee that unauthorised access to the product is prevented. The
storage area must be protected from moisture, direct sunlight, and excessively low temperatures. Store the product in a temper-
ature range 0~+40°C with a maximum relative humidity of 80%. It is recommended to store the product in the original packaging.
O R I G I N A L I N S T R U C T I O N S
15