Systembuild Evolution 2135408COM Manual Del Usuario página 19

STEP 11
Insert the barrel of the lock (12a) into the hole as shown.
With the teeth of the lock nut (12c) facing the door
surface, tighten the lock nut (12c). Position lock bar (12b)
and attached the barrel of the lock (12a) with the lock
screw (12d). Lock bar (12b) will point straight left. When
you turn the lock with the key, lock bar will rotate
counter-clockwise pointing straight down (unlock
position).
12d
12b
12c
Flat /smooth
surface of
lock barrel.
12c
Teeth of lock nut will tighten
against the surface of the
door.
systembuild.com
12b
12a
12c
12a
Keyway Vertical
12d
12e
19
G