Chasing Remote Controller 3 Manual Del Usuario página 4

Method 2： Wi-Fi Connection
·On the Phone/Tablet, go to Wi-Fi settings.
·Wait for 5-10 seconds and the Chasing_xxxx network
EN will appear as an option.
·Click to connect and enter the Wi-Fi password: 12345678
Charging Guidance
The CHASING Remote Controller 3 supports 12.6V 3A, 25.2V 2.9A and 25.2V 8A chargers for charging.
Red light indicates Charging, green light indicates fully charged.
Please disconnect the charger in time after charging is completed.
Please unplug the charger after charging.
Notices
1. You need to turn on the remote controller to check the battery indicator when charging.
2. Do not put the remote controller in the water to avoid damaging the device.
3. Remote controller bracket, remote controller water damage or appearance damage is out
of warranty.
Specifications
Size 160*155*125mm
Weight 685g
Battery capacity 2500mAh
≥6H (Depend on
Battery life
working condition)
Wi-Fi
Wireless
1080P
HDMI
USB communication
TYPE-C
12.6V 1h
Charging time
25.2V 2h
* Note: Charging time varies by environmental factors, actual results will vary.
05
6:27 89%
Wi-Fi
Settings
Wi-Fi
Chasing_xxxxx
CHOOSE A NETWORK...
Gladius_5G_xxxxx
xxxxxxxxxx
xxxxxxxxxx
xxxxxxxxxx
Support
If you have any questions or technical issues, send an email to the aftersales services of
Chasing or contact us on the official website.
Aftersales support on the official website: https://www.chasing.com/ >> Contact us >>
Aftersales service email addresses: support01@chasing-innovation.com for Europe,
support02@chasing-innovation.com for Asia and Oceania,
and support03@chasing-innovation.com for South
America, North America, and Africa.
This guide may be updated without notice.
Visit the Chasing official website for the latest version: https://www.chasing.com
Online Customer Support >>Click here
EN
06