6. Never turn on (off) the machine by plugging the plug to
(pulling the plug out from) the socket. Never increase the
length of the power supply cord to avoid fire.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
8. Never turn the machine upside-down or lean it more than
45°.
9. When the machine is under the ice point and blocked by
ice, the cooling switch must be closed for 4 hours before
turning it on again to continue its operation.
10. This machine should not be turned on until 3 minutes
later after turning off the power switch.
English-6