Publicidad
Idiomas disponibles
Idiomas disponibles
1. Use the screw to fix the bracket on the hole to the
middle bottom of the water dispenser.
2. Make a hole on the floor's (or the desk's) surface
where the water dispenser will be installed.
3. Fix the bracket on the floor by screw tightly.
4. Tighten the screw.
WARNING! To avoid a hazard due to instability of the appliance, it must be fixed
in accordance with the instructions.
Rated
Voltage
Frequency
115 V~
The packaging material used is recyclable; we recommend that you separate plastic,
paper and cardboard and give them to recycling companies. To help preserve the
environment, the refrigerant used in this product is R134a (Hydrofluorocarbon
-HFC), which does not affect the ozone layer and has little impact on
the greenhouse effect. According to WEEE (Waste of Electrical and
Electronic Equipment) guidelines, waste from electrical and electronic
devices should be collected separately. If you need to dispose of this
appliance in the future, do NOT throw it away with the rest of your
domestic garbage. Instead, please take the appliance to the nearest
WEEE collection point, where available.
MACHINE INSTALLATION
TECHNICAL PARAMETERS
Rated
Rated
Power
60 Hz
570 W
Heating
Power
450 W
English-9
Dispensador
de agua
Soporte
El agujero para
apretar el tornillo
Rated
Refrigerant
Current
R134a / 28 g
4.7 A
Publicidad
