Oster OS-WDMI33W Manual De Instrucciones página 19

Please check the followings before having the machine repaired.
PROBLEMS
1. Over consumption of hot or
Not hot or cold
water
2. No power supply
1. Empty bottle
No water
2. Inlet of bottle supporter
running out
from taps
Leakage from
Broken bottle
bottle supporter
Noisy operation Not placid installation
TROUBLESHOOTING
POSSIBLE CAUSES
cold water in short time.
blocked by bottle seal
English-7
ELMINATION
1. Just wait a moment, then hot or
cold water is available again.
2. Connect plug to socket, turn on
heating or cooling switch.
1. Replace it with another one.
2. Clean out wasted paper & bottle
seal, install bottle again
Replace it with a new bottle
Place the machine on placid &
solid surface