Publicidad
Figure 2: Front panel controls (4-channel model shown)
For detailed information on all the button functions, please refer to the user manual.
Name
.
Channel buttons
1
.
Display buttons
2
.
Menu and
3
Search buttons
.
IR receiver
4
.
Status LEDs
5
.
Playback
6
buttons
2
All manuals and user guides at all-guides.com
Description
Switch between different cameras in live, PTZ control or playback modes.
Display: In multiview mode, toggle through the various multiviews (full, quad,
1+5, 1+7, 9 and 16).
In HDD information mode and user management mode delete a selected item. In
PTZ mode, delete a selected key point. In Log Search mode, display the details
of a log file in Log Search result.
Seq: In Live View mode, start/stop sequencing cameras on the current monitor.
Menu: Enter/exit the main menu.
Search: In live view, enter the advanced search menu.
Receiver for IR remote.
To connect the remote control to the recorder, press the Device button, enter the
device address, and press Enter. See "IR remote control" on page 5 for more
information.
Power: A steady green light indicates the recorder is working correctly. Red
indicates a fault.
Event Alarm: A flashing red light indicates that there is a sensor Alarm In or
another alarm such as motion or tampering. No light indicates that there is no
alarm.
HDD: HDD indicator blinks red when data is being read from or written to the
HDD. A steady red light indicates an HDD exception or error.
Tx/Rx: Steady green indicates a normal network connection. No light indicates
that it is not connected to a network.
Technical Alarm: A steady red light indicates that there is a technical alarm from
the recorder. No light indicates that there is no alarm.
Reverse: In live view mode, use to play back the earliest video. In playback
mode, playback a camera in the reverse direction.
Pause: In live view, freeze the last image of the live display for all active cameras
displayed. In playback mode, stop playback.
TVN 11 Quick Start Guide
Publicidad
