STEINEL US 360 COM1 Manual De Instrucciones página 23

7. Technical Specifications
Dimensions (W x H x D):
Power supply:
Capacity, switching output 1:
(COM 1 / COM 2)
Electronic ballasts:
(COM 1 / COM 1 AP / COM 2 / DIM)
Capacity, switching output 2:
(COM 2 only)
Detection ranges:
(Detection Tangential / presence (m):
at 2.5 m / mounting
height 2.5 m)
Light-level setting:
Switching output 1:
Time setting
Switching output 2:
Time setting
DIM:
Time setting
Control output:
Mounting height:
(mounted to ceiling)
Point of installation:
Sensor technology:
DualTech
US 360 / Single US / DualTech
IP rating:
Protection class:
Temperature range:
120 x 120 x 68 mm DualTech
120 x 120 x 73 mm Single US
120 x 120 x 68 mm US 360
120 x 120 x 73 mm Dual US
230 – 240 V, 50 Hz / 60 Hz
Relay, 230 V
2,000 W max. resistive load (cos φ = 1)
1,000 VA max. (cos φ = 0.5)
Max. ON current 800 A / 200 μs
30 x (1 x 18 W), 25 x (2 x 18 W)
25 x (1 x 36 W), 15 x (2 x 36 W)
20 x (1 x 58 W), 10 x (2 x 58 W)
Pay attention to specific ON currents of electronic ballasts!
A relay or contactor must be provided on line side for
higher switching capacities
Presence
230 W / 230 V
1A max. (cos φ = 1) for HVAC (heating / ventilation / air-
conditioning)
US 360 / DualTech
Ø 6 m max. (28 m
Ø 2 m min. (3 m
Radial: Reach up to Ø 10 m
10 – 1,000 lux, ∞ / daylight /
DIM 100 – 1,000 lux control threshold
30 sec. – 30 min., pulse mode (approx. 2 sec.),
IQ mode (automatic adjustment to the usage profile)
COM2 only, for HVAC
0 sec. – 10 min. switch-ON delay
1 min. – 2 hrs. stay-ON time
Automatic room surveillance
30 sec. – 30 min.,
IQ mode (automatic adjustment to the usage profile)
1 – 10 V / 50 electronic ballasts max., 100 mA max.
2.5 m – 3.5 m
Indoors
PIR (Passive Infrared), single pyro, 11 detection levels,
520 switching zones. Ultrasonic 40 kHz
Ultrasonic 40 kHz
IP 20
II
-25 °C – +55 °C
- 23 -
SingleUS / Dual US
)
2
)
2
3 x 9 m / 3 x 18 m (27 / 54 m²) max.
3 x 2.5 m / 3 x 5 m (7.5 / 15 m²) min.
GB