Greencut ATS Serie Manual De Instrucciones página 36

36
1. Control Switch: Press "I" to turn it on and press "O" to turn it off.
2. Manual Start Switch: Press "I" to start the generator if it fails to start automatically.
3. Power Supply. Indicator light: It will be lit if load appliance is powered by main power supply.
4. Generator Supply. Indicator light: It will be lit if load appliance is powered by generator power supply.
5. Load Output. Indicator light: It will be lit if load appliance is running.
6. Load Output. Terminal: Used for connecting load appliance.
7. Generator Supply. Terminal: Used for generator power supply input connection.
8. Power Supply. Terminal: Used for main power supply input connection.
9. Circular Hybrid Connector: Used for control signal connection and transmission.
10. Fuse: Used for overload protection.
11. Ground Terminal: Please consult a local licensed electrician for local grounding regulations.
TECHNICAL DATA
Model
Power
Voltage
Frequency
Phase
Dimensions (length, width, height)
NOTA: GREENCUT reserves the right to modify the specifications of the device without prior notice.
BOX CONTENTS
ATS-14000
ATS + Circular hybrid connector cable (five-wire cable for a diesel generator).
ATS-14000T
ATS + Circular hybrid connector cable (five-wire cable for a diesel generator).
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
ATS
ATS-14000
25A
200~240V
50Hz
Monofásico
220x210x100mm
ATS-14000T
20A
200~240V/380~440V
Doble voltaje
50Hz
Trifásico
220x210x100mm