Greencut MMA-200 Manual De Instrucciones página 40

40
TROUBLESHOOTING
Good maintenance will extend the life of the machine. Prolonged or continuous use of the unit may require more
intensive maintenance so that the machine continues to function properly. The table includes some of the most
common problems, their causes and resolution.
The power indicator is not lit and the fan does not
work.
The power indicator comes on but the fan does not
work.
The overload warning light comes on as soon as the
welder is connected.
The fan is working, but the power indicator light does
not come on and there is no power.
The fan works, the power indicator light comes on but
there is no power.
NOTE: If you can not solve the problem, contact an Authorised Service Centre.
ELIMINATION / RECYCLING
Worn products are potentially recyclable and should not be disposed of in the usual bin. Help us protect the
environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly way. Do not throw it away with the household rubbish. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green point).
The materials used in the packaging of the machine are recyclable: please throw them in the appropriate container.
GUARANTEE
GREENCUT guarantees all products for a period of 2 years (valid for Europe). This guarantee is subject to the purchasing
date and taking into consideration the purpose of use of the product.
In order to claim your guarantee, you must present your receipt of purchase and its description, as well as the defective
product.
The guarantee does not cover normal wear and tear, especially on blades, blade elements, turbines, lighting sources,
vent and transmission belts, impellers, air filters, spark plugs and damage caused due to improper use of the machine,
especially due to failure to comply with the operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or any other than with the original
GREENCUT spare parts, the guarantee will be voided.
In the event of a justified guarantee claim, we are authorised, at our discretion, to repair or replace the defective tool
free of charge. Claims beyond those described in this guarantee will be invalid.
PROBLEM SOLUTION
• Check the ON/OFF switch.
• Check the connections of the machine.
• Connection of loose cables.
• Problems in the circuit. Take the machine to an
Authorised Service Centre.
• Main circuit failure. Take the machine to an
Authorised Service Centre.
• Possible connection to the wrong power switch.
• Take the machine to an Authorised Service Centre.
• Main circuit failure.
• Take the machine to an Authorised Service Centre.