Publicidad
Idiomas disponibles
Idiomas disponibles
Extra support
4
Place the clear mounting
clips carefully over the light
strip and screw into the
surface. Use caution to not
screw into the light strip.
PROBLEM
LED strip does not light up.
1. Power/light switch is o .
1. It is mounted on unfinished wood or a particle board surface.
LED strip adhesive is losing
adhesion.
2. Surface is not wiped down.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications of this product is not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving
antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. --
Consult the dealer or an experienced radio/TV technician for help. FCC responsible party name : Good Earth Lighting Inc. Address: 1400 E Business Center Drive, STE 108 Mount
Prospect, IL 60056 USA. Telephone number: 1-800-291-8838
Good Earth Lighting
- The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (6)
®
years from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail application. The
warranty is limited to use in a residential environment. We will repair or replace (at our option) the unit in the original color and style if available,
or in a similar color and style if the original item has been discontinued, without charge. Defective units must be properly packed and returned to
the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
return authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be accepted. The liability of
the manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other
loss, damage, labor costs, or injury which is caused by the product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs, or injury which is (I) to person or property or otherwise; (II) incidental or consequential in nature; (III) based upon theories
of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product.
This warranty gives you specific rights, and you may also have other rights which vary from state to state.
Need
Please visit our website at:
https://goodearthlighting.com/contact-us
Help?
or call the Customer Care Center
1-800-291-8838, 8:30 a.m.-5 p.m., CST,
Monday-Friday.
ATTENTION
● Aucun des composants de ce produit n'est
réparable. N'altérez aucune partie de ce kit en
dehors de la longueur du ruban lumineux.
● Pour utilisation À L'INTÉRIEUR exclusivement.
● Voir le verso de l'étiquette du luminaire pour
connaître les spécifications électriques.
● Ce ruban lumineux n'est PAS extensible. Il n'est
PAS POSSIBLE d'ajouter des longueurs
additionnelles de ruban lumineux à LED
● Utilisez seulement des agrafes ou des attaches
en plastique isolées (non incluses) pour
sécuriser les cordons.
● NE PAS utiliser avec un cordon de rallonge.
Utilisez une barrette d'alimentation avec
protection intégrée contre les surintensités pour
alimenter le luminaire. N'utilisez jamais de
barrette d'alimentation électrique, sauf si la fiche
peut être insérée complètement.
● Les DEL émettent progressivement moins de
lumière au fil du temps.
TROUBLESHOOTING GUIDE
BEFORE DOING ANY WORK ON THE FIXTURE, UNPLUG
DANGER!
UNPLUG THE USB CORD FROM THE POWER SOURCE
POSSIBLE CAUSE
6-YEAR LIMITED WARRANTY
FRANÇAIS INSTRUCTIONS
INFORMATIONS RELATIVES À LA SÉCURITÉ
CE RUBAN PEUT ÊTRE COUPÉ, MAIS PAS RACCORDÉ
AVERTISSEMENT
● NE PAS INSTALLER PENDANT QUE LE RUBAN
LUMINEUX EST BRANCHÉ. NE PAS brancher le
Cordon USB avant que l'installation nesoit
terminée.
● NE PAS toucher, utiliser ou installer un luminaire
en contact avec de l'eau. Non conçu pour
illuminer des aquariums.
● NE PAS regarder directement une DEL allumée
pendant une durée prolongée.
● N'UTILISEZ PAS CE LUMINAIRE AVEC UN CIRCUIT
GRADATEUR. Si des commandes de gradateur
sont présentes, retirez-les et remplacez-les.
Cord Management
5
Using the included
cord clip, peel the
back liner o , and
attached to
surface.
1. Turn switch on.
1. Mount with brackets and screws (not included).
2. Clean surface and reapply new layer of double-sided tape such as 3M VHB (not included).
FCC STATEMENT
For more
information
about this
product,
Scan this QR
code:
Connecting USB Cord
6
Once the LED tape lights are firmly in
place, plug the USB connector into a
television, computer laptop, or USB
adapter (not included).
CORRECTIVE ACTION
Good Earth Lighting
Good Earth Lighting
®
registered trademark of
1400 East Business Center
Good Earth Lighting, Inc.
Drive, Ste. 108
© 2023 Good Earth
Mount Prospect, IL 60056
Lighting, Inc. REV06.23
MISE EN GARDE
●
Si vous ne savez pas comment e ectuer des
installations électriques, contactez un électricien
professionnel pour réaliser l'installation.
●
Ce luminaire n'est PAS conçu pour une
installation encastrée dans un faux-plafond ou un
so te. NE PAS faire passer de cordons derrière
les murs, les plafonds, les so tes, les armoires
ou une structure permanente similaire où ils
pourraient être inaccessibles pour un examen.
●
Le ruban lumineux doit être complètement
déroulé pour permettre un fonctionnement
correct et pour prévenir toute surchau e.
●
Le luminaire peut être installé à l'intérieur d'une
enceinte, telle qu'une armoire, UNIQUEMENT
lorsque l'ADAPTATEUR D'ALIMENTATION est situé
à l'extérieur de l'enceinte.
●
Ne montez PAS au-dessus d'éviers ou de poêles.
is a
®
2
Publicidad
