Descargar Imprimir esta página

Jata JCRC2115 Instrucciones De Uso página 12

Radiador micathermic

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• WARNING: Do not use this heater in small rooms that are
occupied by people who cannot leave the room themselves,
unless permanent surveillance is provided.
• To unplug, pull from the plug, never from the cable.
• WARNING: To reduce the risk of fire, keep textiles, curtains or
other flammable material at a minimum distance of 1 m from
the air outlet.
• Always place the heater in vertical position.
• Do not rest the cable on hot parts of the appliance.
• This device has a built-in security system that interrupts
operation in case of overheating. If this happens, unplug and
wait about 30 minutes before connecting again.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
LEGS ASSEMBLING
• The legs (5) must be assembled at the end of the lower part of the appliance.
• Match the holes of the legs with the axes located in the lower part, then screw them.
INSTRUCTIONS OF USE
• Plug in the appliance to the mains.
• Turn the thermostat knob (3) clockwise to the maximum position (MAX.)
• Place the power selector (2) in the desired position. Doing this operation the indicator (4) will light on. Have
in mind that:
Position I: minimum power.
Position II: maximum power.
Position 0: off.
• Once the room reached the desired temperature, turn the thermostat knob (3) anti-clockwise until the pilot
light (4) goes off. Leave the knob in that position and the thermostat automatically maintains at the selected
temperature.
12

Publicidad

loading

Este manual también es adecuado para:

Jcrc2120