INSTRUCTIONS OF USE
INSTRUCTIONS OF USE
• The scale works with 1 battery type CR2032 (included).
• Remove the protection label from the battery for the scale to work. If necessary open the
lid of the battery compartment.
• Place the scale on a horizontal and rigid surface.
• Do not place on carpets or any other soft surface, as the weight given would be erroneous.
• Ensure the surface where you place the bathroom scale and the platform of the scale is
dry to avoid slipping.
• Before using the scale push the switch situated on the lower part to the desired weight
measure Kg. (kilograms) - Lb. (pounds) - Lb-St. (pounds-stones).
• Get on the scale by putting first one foot slowly on the platform and next the other.
• Stand for a few seconds until your weight shows on the display and flashes, and then stays
on.
• Do not jump on or off the scale.
• The appliance switches off automatically a few seconds after carrying out the weighing
operation.
• If the display shows "Err" the weighing process has not been carried out correctly then
weight it again.
• It is advisable to always weigh yourself at the same time, preferably before breakfast.
• Do not leave anything on the scale while not in use. The appliance will use up the batteries.
• Do not immerse the body of the appliance in water. If necessary clean the scale with a
damp cloth.
• In cleaning do not use chemical or abrasive products, such as metallic scourers which may
deteriorate the surfaces of the appliance.
BEAR IN MIND THAT
• If "Err" shows on the display it means the maximum weight of the scale has been exceeded.
• You must proceed to change the batteries when the "Lo" symbol is showed on the display.
To do that, open the cover placed in the back side of the appliance and change the battery
having in mind the indication "+" must be visible once placed.
5
Mod. 294K / 295K
ENGLISH