Jata JCTC3230 Instrucciones De Uso página 11

• Always place the heater in vertical position and stand it on a
firm solid horizontal base (not over carpets specially quilted
carpets).
• Do not fix the tip over switch. It is dangerous that the switch
get fixed, because in case of the appliance falling it would not
do its function.
• Do not rest the cable on hot parts of the appliance and avoid to
place it in the air output grid.
• This appliance incorporates a safety device which will
disconnect the resistance in case of overheating.
• The cleaning and maintenance done by users, can not be done
by children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
MOUNTING
CLAMP SUPPORT
• The support bracket (6) must be placed on the sides of the appliance.
• Match the ends of the support (6) with the holes located on the outside of the appliance. Then secure it with
the included wing nuts.
INSTRUCTIONS OF USE
• Plug the appliance into the mains
• Turn the thermostat knob (3) clock-wise to the maximum position (MAX).
• Turn the power selector (1) to the desired position. The fan heater will start to work.
-Position : The appliance will work as a fan and only give cold air.
-Position "I": Minimum power.
-Position "II": Maximum power.
-Position "0": Off.
• When the room reaches the desired temperature, turn the thermostat knob (3) anti-clock-wise until an
acoustic signal is heard, the operation of the fan heater will go off. The thermostat will automatically maintain
the selected temperature.
• You can place the desired position of the fan heater using the position regulators (5).
MAINTENANCE AND CLEANING
• Before you proceed to cleaning ensure the appliance is unplugged.
• Allow to cool and clean with a soft dry cloth.
• It is important to keep the air intake and output grids clean of dust and fluff.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the surfaces of
the appliance.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
11