Silk’n SILKYAIR FLEX SIF005 Manual De Usuario página 10

6.1 Using the auto wrap barrels
• The product comes with 2 auto wrap barrels. The left one has an arrow
pointing to the left ( ) whereas the right one pointing to the right ( ).
• Use the left one on the left side of your head for anticlockwise curls and the
right one on the right side of your head for clockwise curls.
1. According to your styling needs, attach the left auto wrap barrel
wrap barrel to the air outlet
18
2. Turn on the product.
3. Hold the hair section and place the top/middle part of it onto the auto wrap barrel
(see step 1 in Fig. D).
The auto wrap barrel automatically wraps your hair section around the barrel.
Make sure your hair is not too wet if it shows difficulty wrapping around the barrel.
4. Gradually move the product towards your head and allow the auto wrap barrel to
wrap the whole hair section (see step 2 in Fig. D).
5. Once the wrapping ends, let go of the hair section and allow the product to continue
heating the hair section until the desired curls reveal.
The required time and temperature may vary depending on the texture and moisture
level of your hair.
6. Once the curls form, press and hold the temperature button
to activate the cool air function. Allow the cool air to blow for around 10 seconds.
This helps to set the styling.
7. When styling is done, pull the product straight down to release the hair section.
7 Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
• Always disconnect the mains cord and let the product completely
cool down before cleaning.
NOTICE! RISK OF DAMAGE!
• Never immerse the product in water or other liquids. Make sure
that no water or other liquids penetrate the housing.
• Do not use any aggressive cleaners, brushes with metal or nylon
bristles, or sharp or metallic cleaning utensils such as knives, hard
scrapers and the like.
1. Clean the product with a damp cloth.
2. Dry the product thoroughly with a soft and clean cloth.
.
1
or right auto
17
for around 2 seconds
6
EN
10