Publicidad
Idiomas disponibles
Idiomas disponibles
ECO Manual Mode
EN
The ECO mode
which must be between 5°C and 19°C.
Select the mode by repeatedly pushing the navigation key, and push
activate it.
To set the reference temperature, push
Push
again to confirm, the thermostat displays the measured temperature again. In
any case, after a delay of 10 seconds, the thermostat displays the ambient temperature
measured again.
Automatic Mode
To use this mode, the Programme mode
must be set correctly. Select the mode by repeatedly pushing the navigation key
,and push
Automatic mode allows the thermostat to operate automatically, according to the
programme selected, which must be chosen using the relevant Programme mode .
When
temperature, temperature setting, and current time can be displayed.
Temperature setting
Early start in mode
When the thermostat is on in automatic mode, it is possible to change the temperature
(for the current half hour) manually, by repeatedly pushing the and keys. This
generates an early start and the
of the half hour in which the temperature was changed, the
and the thermostat returns to applying the programme set.
maintains a lower temperature,
to activate it.
mode is active, by pushing the
Measured temperature
and select it using the
must be set, and the date and time
key repeatedly, the measured
pictogram is displayed on the screen. On expiry
18
to
and
keys.
Current time.
pictogram disappears
Publicidad
