Publicidad
Idiomas disponibles
Idiomas disponibles
Clock mode
EN
In this mode the system's date and time can be set.
Select the mode by repeatedly pushing the navigation key
and push
Then hold
display, it can be edited using the and keys. Once the value has been selected, it
must be confirmed by pushing
message at the top of the display shows the type of parameter selected H=hour,
M=minutes or months, d=day). Setting sequence:
Time and day of the week:
•
Hour and minute setting.
•
Day of the week setting (1 Monday, 2 Tuesday, and so on).
When the day of the week is confirmed, a "DATES" message appears for a few
seconds, and date editing begins automatically.
Date:
•
Day setting.
•
Month setting.
•
Year setting.
On completion of configuration a "SAVE" message is displayed. To confirm the
date and time settings, push
Programme mode
The programme mode
mode
Select the mode by repeatedly pushing the navigation key and push
To select the required programme, repeatedly push the and keys.
Push
again to launch the programme.
There are 9 pre-set programmes that cannot be edited (from P1 to P9) and 4
programmes that can be edited by the user (from U1 to U4).
to activate it.
down until the hour starts to flash. Each time a parameter flashes on the
is used to choose the programme to be applied in automatic
.
and the next parameter will begin to flash. (A
.
20
,
to activate it.
Publicidad
