Descargar Imprimir esta página

CORBERO CTM500FL Manual De Instrucciones página 20

Termo eléctrico extraplano

Publicidad

If any parts and components of this electrical water heater are damaged please contact customer
care center for repair.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
The maximum inlet water pressure is 0.5MPa; the minimum inlet water pressure is 0.1MPa, if this
is necessary for the correct operation of the appliance.
The water may drip from the discharge pipe of the pressure-relief device and that this pipe must
be left open to the atmosphere; The pressure-relief device is to be operated regularly to remove
lime deposits and to verify that it is not blocked.
In order to drain away the water inside the inner container, it can be drained away from the
pressure release valve. Twist the thread screw of the pressure release valve off, and lift the drain
handle upwards.(See Fig.1) A discharge pipe connected to the pressure-relief device is to be
installed in a continuously downward direction and in a frost-free environment.
2. PRODUCT INTRODUCTION
2.1 Technical Performance Parameters
Volume
Model
CTM500FL
CTM750FL
CTM1000FL
2.2 Brief introduction of product structure
A
B
A
B
C
D
E
F
Rated
Rated
Power
Voltage
(L)
(W)
(ACV)
220-240
47
2000
220-240
74
2000
220-240
93
2000
CTM500FL
470
860
286
355
183
470
(Note:All dimensions are in mm)
Rated
Max Of Water
Pressure
Temperature
(MPa)
(°C)
0.75
75
0.75
75
0.75
75
C
CTM750FL
CTM1000FL
570
900
1090
317
415
265
365
3
Protection
Waterproof
Class
Grade
I
IPX4
I
IPX4
I
IPX4
F
D
E
570
317
415
265
365

Publicidad

loading

Este manual también es adecuado para:

Ctm750flCtm1000fl