Publicidad
3.2 Pipelines Connection
①
The dimension of each pipe part is G1/2" ; The massive pressure of inlet should use Pa as
the unit; The minimum pressure of inlet should use Pa as the unit.
②
Connection of pressure relief valve with the heater on the inlet of the water heater.
③
In order to avoid leakage when connecting the pipelines, the rubber seal gaskets provided with
the heater must be added at the end of the threads to ensure leak proof joints (see Fig.4).
Rubber seal gaskets
Hot water outlet
Adjusting handle for
mixing valve
④
If the users want to realize a multi-way supply system, refer to the method shown in fig.5 and
fig.6 for connection of the pipelines.
Hot
Triple joint
water
outlet
Water pool
Hot water
Cold
water
inlet
Mixing valve
VERTICAL INSTALLATION
6
Power cord
Rubber seal gaskets
Cold water inlet
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Power cord
Pressure relief valve
Water inlet valve
Running water pipe
(Fig.4)
Shower nozzle
Water inlet valve
(Fig.5)
Publicidad
