Publicidad
Idiomas disponibles
Idiomas disponibles
USER MANUAL
This symbol indicates hazards caused by hot surfaces.
This symbol indicates dangers due to high volume levels.
This symbol denotes a device that does not contain any user-serviceable parts.
This symbol indicates additional information on the operation of the product.
This symbol indicates a device that may only be used in dry rooms.
SAFETY INSTRUCTIONS
DANGER:
1.
Do not open the device and do not make any modifications.
2.
If your device no longer functions properly, if liquids or objects get inside it or if it has been damaged in
any other way, switch it off immediately and disconnect it from the mains. The device may be repaired
only by authorised repair technicians.
3.
For devices of protection class 1 the protective conductor must be connected correctly. Never
disconnect the protective conductor. Devices of protection class 2 do not have a protective earth
conductor.
4.
Ensure that live cables are not kinked or otherwise mechanically damaged.
5.
Never bypass the device fuse.
WARNING:
1.
The device must not be used if it shows obvious signs of damage.
2.
The device may only be installed in a voltage-free state.
3.
If the mains cable or power supply unit of the device is damaged, the device must not be put into
operation.
4.
Permanently connected power cables may only be replaced by a qualified person.
ATTENTION:
1.
Do not switch on the device if it has been exposed to extreme temperature fluctuations (for example,
following transport). Moisture and condensation can damage the device. Switch on the device only
when it has reached ambient temperature.
2.
Ensure that the voltage and frequency of the mains supply match the values specified on the device.
If the device has a voltage selector switch, do not turn the device on until it has been set correctly. Use
only suitable power cables.
EN
4
Publicidad
