General Safety Rules; Intended Use - Urrea NL2 Manual De Usuario Y Garantía

GENERAL SAFETY RULES

Working safely with the measuring tool is pos-
sible only when the operating and safety in-
formation are read completely and the instruc-
tions contained therein are strictly followed.
Never make warning labels on the measuring
tool unrecognizable. SAVE THESE INSTRUC-
TIONS.
CAUTION: The use of other operating or
adjusting equipment or the application of
other processing methods than those men-
tioned here, can lead to dangerous radiation
exposure.
Do not direct the laser beam at per-
sons or animals and do not stare into
the laser beam yourself. This measuring tool
produces laser class 2 laser radiation according
to IEC 60825-1. This can lead to persons being
blinded.
• Do not use the laser viewing glasses as safety
goggles. The laser viewing glasses are used for
improved visualization of the laser beam, but
they do not protect against laser radiation.
• Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glasses
do not afford complete UV protection and re-
duce color perception.
• Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
• Do not allow children to use the laser mea-
suring tool with- out supervision. They could
unintentionally blind other persons or them-
selves.
• Do not operate the measuring tool in explo-
sive environments, such as in the presence of
flammable liquids, gases or dusts. Sparks can
be created in the measuring tool which may
ignite the dust or fumes.
+ Keep the measuring tool away from cardiac
pacemakers. The magnets 7 generate a field
that can impair the function of cardiac pace-
makers.
+ Keep the measuring tool away from mag-
netic data medium and magnetically-sensitive
equipment. The effect of the magnets 7 can
lead to irreversible data loss.
E N G L I S H •
FEATURES

INTENDED USE

The tool is intended for determining and in-
dicating exact horizontal and vertical lines. It
is also suitable for checking plumb lines and
horizontal partitions or surfaces.
The tool is suitable exclusively for operation in
enclosed/ interior working sites.
KNOW YOUR TOOL
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1. Exit opening for
laser beam.
2. Automatic lev-
elling indicator.
3. On/Off switch.
1
4. Latch of battery
lid.
8
5. Battery lid.
6. Contact surface.
7. Laser warning
label.
8. Tripod mount
1/4".
9. Laser viewing glasses*.
10. Tripod*.
11. Clamp*.
* The accessories illus-
trated or described are
not included as standard
delivery.
OPERATION INSTRUCTIONS
IMPORTANT: The safe use of this product
requires an understanding of the information
on the tool and in this instruction manual, as
well as knowledge of the project you are at-
tempting. Before use of this product, familiar-
ize yourself with all operating features and
safety rules.
U se r's m a n ua l
2
3
4
5
6
7
11
5