Publicidad
EN
1. Before rst use
Remove all packaging materials. This includes the foam base and all adhesive tape
holding the wine cellar accessories inside and outside. Keep them out of children's
reach and dispose them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent before
putting any wine in it.
After the appliance has been levelled and cleaned, wait for at least 2 hours before
connecting it to the power supply. If your wine cellar has been tilted for any reason,
wait 24 hours before plugging it in. See section INSTALLATION.
Once you have plugged the unit into an electrical outlet, let the unit run for at least
30 minutes to acclimatize itself before making any adjustments.
The temperature is automatically set to 12 °C. If desired, you can change the tem-
perature manually. Please see TEMPERATURE.
2. Touch buttons
The buttons on the control panel are touch buttons, which respond when lightly touched
3. Description for control panel
A
A Light button
B Temperature adjust button:down
C Display
4. Automatically locking function
In the lock screen state, long press the lock button for 3S, the display screen displays
3, 2 and 1, the display screen is unlocked;If there is no operation, the screen will be
locked automatically after 30s,In the lock screen state, all the lock button icons are on,
and the buttons on the display screen cannot be operated (except the lighting button);
B
C
D Temperature adjust button:up
E Lock button
D
E
19
Publicidad
