Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3A. INSTALL THE WHEELS AND WHEEL GUARD
•
Lift the Bike Trailer so the right hand side is up and insert the rear axle (Fig 9).
•
Slide the spacer on and then put the rear wheel on (Fig 10).
9
•
Repeat for the left hand side.
•
Now, whilst holding one side with a wrench, tighten the opposite side and then repeat process for other side (Fig 11).
•
Install the wheel guards by depressing the spring pin and insert the tube in the frame until the spring locks back
into place.
11
STEP 3B. INSTALL THE WHEELS AND WHEEL GUARD (QUICK RELEASE MODEL)
•
Assemble the wave gasket to the rear axle.
•
The rear axle goes through rear wheel , place spacer outside of the rear wheel and then assemble to the quick
release system.
NOTE: Wheels Must be installed securely,if not they many fall off.
10
33
BIKE TRAILER BIKID
EN
Publicidad
