Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 4. ATTACH THE FOUR SEASON COVER
•
Position the Four Season cover over the Bike Trailer where the roll up window is facing towards the front side of the trailer.
•
Warp the Velcro back fixing straps and secure the cover around the frame.
•
Secure the Velcro material at the bottom of the front cover to the matching Velcro material on the lower front
fabric panel.
•
Connect the side release buckles affixed to the rear corners of the cover to the matching buckles on the rear side
of the Bike Trailer cabin.
12
NOTE: The Four Season cover is designed to keep passengers and cargo dry and warm in inclement
weather. It also protects children from flying debris . The Four Season cover can be rolled up to allow for
added ventilation in hot weather. Velcro closures keep the Four Season Cover in place when rolled up.
WARNING: Never use the Bike Trailer without the Four Season cover. The front window must be
attached to protect children from flying objects.
STEP 5. INSTALLATION OF THE SAFETY FLAG
•
The flag is located on the left hand side of the Bike Trailer cabin, be sure to insert the flag into the below shown
pocket.
•
Remove the flag before attempting to fold.
STEP 6. FRONTWHEEL AND HANDLEBAR ASSEMBLY
•
Fit wheel onto forks, with outer axle sitting flush with fork inset. Ensure one side of fork lock clamp and washers
are on inner axle rod (Fig 15).
15
14
34
13
Publicidad
