Publicidad
Idiomas disponibles
Idiomas disponibles
58
STEP 2: ATTACH TOW BAR AND FRONT SUPPORT LEG
1.
Attach the tow bar (nº58) to the hydraulic tank using hex bolt M12x100 (nº69), flat washer Ø12 (nº4) and
lock nut M12 (nº8).
STEP 3: ATTACH BEAM TO THE TOW BAR
58
1.
Attach beam to the tow bar using hitch pin (nº10) and R pin (nº11).
2.
Attach hydraulic hose (nº22) to hydraulic reservoir connector, sealing with
O-ring Ø14x2.5 (nº20).
NOTE: Tighten hydraulic hose connector between torque of 80-
90 N-m. Adjust the hydraulic hose to a non-kinked state and the
connector in an upright position.
11
10
22
8
4
69
Publicidad
