Dreame H12 Dual Manual De Instrucciones página 11

Troubleshooting
EN
Error Possible Cause
The appliance is out of battery or its
position.
The appliance
The Used Water Tank is full.
not installed in place.
The appliance The temperature of the battery is
of the appliance is
in the tube and the suction inlet
blocked.
The motor is
noise.
The suction inlet is blocked.
inserted into the electrical outlet
properly.
The display screen
The appliance is not placed onto
It takes 30 seconds to dampen the
brush roller.
17 17
Solution
use.
Recline the appliance
until the temperature returns
normal.
Empty the Used Water Tank.
Wait until the battery's
temperature returns normal.
Clean the tube and the suction
inlet.
suction inlet.
Make sure the appliance is
properly.
Tank.
Troubleshooting
A collision or a sharp pull causes
The brush roller may be jammed by
full.
The air outlet and air inlet of the
performance.
EN
use.
check and clean the brush roller.
Make sure the appliance is
Water Tank.
Tank.
air outlet and air inlet.
18 18