Descargar Imprimir esta página

Ferroli BlueHelix HiTech RRT H Instrucciones De Uso, Instalación Y Mantenimiento página 286

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1. Operating instructions
1.1 Introduction
Dear Customer,
BlueHelix HiTech RRT H is a high efficiency, low emissions premix condensing heat generator
with heat exchanger in s/steel, equipped with a microprocessor control system.
It can run on Natural Gas (G20), Liquefied Gas (G30-G31), Propane Air (G230) and, thanks to
the "Hydrogen plug-in" system, self adjusts to also work with mixtures of natural gas and hy-
drogen (Natural Gas/Hydrogen mixtures 80%/20%), that will soon arrive in Europe to fight global
warming.
The sealed chamber unit is suitable for indoor installation or outdoors in a partially protected
place (according to EN 15502) with temperatures to -5°C.
The boiler is arranged for connection to an external storage tank for hot water (op-
A
tional). In this manual, all the functions regarding DHW production are active only
with the optional hot water tank connected as indicated in sec. 2.3.
1.2 Control panel
5
1.2
8
15
14
45
14
25
4
3
6
7
fig. 1- Control panel
286
12
10
bar
9
°C
13
°C
11
2
1
cod. 3541V484 - Rev 02 - 01/2024
BlueHelix HiTech RRT H
Panel legend fig. 1
1
DHW temperature setting decrease
button
2
DHW temperature setting increase but-
ton
3
Heating system temperature setting de-
crease button
4
Heating system temperature setting in-
crease button
5
Display
6
Return button
7
"Winter", "Summer", "Unit OFF", "ECO",
"COMFORT" mode selection button
8
Eco mode ( )
9
DHW mode
10 Summer/Winter mode
11 Menu / confirm button
12 System pressure
13 Heating mode
14 Burner lit
15 "Key lock" on
EN

Publicidad

loading