Indel B TB65 DD STEEL Manual De Instrucciones página 29

STARTING AND OPERATING
DC CONNECTION
The unit is equipped with an electronic control system that will prevent polarity reversal. In the event that the battery
connection is reversed the unit will not start or operate.
The power inlet socket is fitted with a 15A fuse for protection.
Plug the 12/24V connection cable into the DC voltage socket on the rear and then connect to the cigarette lighter or a
suitable 12V or 24V power source.
DISPLAY AND FEATURES
1 INPUT VOLTAGE DISPLAY
2 UP BUTTON
3 DOWN BUTTON
4 POWER ON/OFF BUTTON
5 SET BUTTON
6 BATTERY MONITOR DISPLAY
7 TEMPERATURE DISPLAY LEFT ZONE
8 TEMPERATURE DISPLAY RIGHT ZONE
9 MODE DISPLAY
POWERING ON
Connect to the desired voltage input and press and hold the ON/OFF button for three seconds to switch the unit on: the
display will show the current internal temperature of the appliance.
27
7
9
5
OFF IS A BRAND OF INDELB
DC Power Cable
8
1
6
4
EN
2
3