Publicidad
Idiomas disponibles
Idiomas disponibles
RESERVATION - Device operation time on / off button.
TRANSFORMATION - Button to change the display mode: the display shows temperature or time.
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory, and intellectual
functions. Place the unit in such a way that the main plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
Before using the unit for the first time, disassemble all parts and wash them as well as the entire unit.
3.3.
Installation of the unit
1) Place the water tray on the bottom.
2) Screw one end of the inlet tube into the water inlet on the back of the device.
3) The other end of the inlet pipe should be screwed to a water source or tap with a threaded hole.
4) Open the water supply.
5) Connect the unit to the power supply.
3.4.
Working with the device
Temperature setting
1) When using for the first time, press the ON/OFF button for 5 seconds, when "HP" is displayed, the
originally set temperature of the dispenser will be displayed immediately.
2) Hold the ON/OFF button for 5 seconds to turn off the device. Gently press the ON/OFF button to turn on
the device.
3) When "HP" appears on the screen, press the RESERVATION button to increase the temperature, press
the TRANSFORMATION button to decrease the temperature.
Time setting
Example: 7:30:
1) Press the ON/OFF button for 3 seconds until the display shows "
2) Use the RESERVATION or TRANSFORMATION button to set the value to 7.
3) Press the ON / OFF button to set the minutes value. Use the RESERVATION or TRANSFORMATION button
to set the value to 30.
4) Press the ON/OFF button or wait 20 seconds to confirm the setting.
Setting the on/off time of the device
Example: Set the power on time at 8:30 a.m. / power off time at 10:30 p.m.:
1) Press the ON/OFF button for 3 seconds until the display shows "
2) Use the BOOKING or TRANSFORMATION button to set the value 8.
3) Press the ON/OFF button until the display shows "
RESERVATION or TRANSFORMATION button.
Setting the power off time in the evening at 10:30 p.m.
4) Press the ON/OFF button until the display shows "
BOOKING or TRANSFORMATION button.
5) Press the ON/OFF button until the display shows "
RESERVATION or TRANSFORMATION button.
EN
".
", then set the value to 30 using the
", and then set the value to 22 using the
", then set the value to 30 using the
".
Publicidad
