Publicidad
Enlaces rápidos
M R 7 N
Indoor Recessed Ceiling Mount Dome Housing
Installation and Operation Instructions for the following models:
MR7CN
Indoor 7" Recessed Ceiling housing, with network camera
adapter brackets, clear dome
MR7TN
Indoor 7" Recessed Ceiling housing, with Network camera
adapter brackets, tinted dome
Before attempting to connect or operate this product,
please read these instructions completely.
www.videolarm.com
CERTIFIED
81-IN5323
05-17-2010
Publicidad
Manuales relacionados para Moog Videolarm MR7CN
Resumen de contenidos para Moog Videolarm MR7CN
- Página 1 M R 7 N Indoor Recessed Ceiling Mount Dome Housing www.videolarm.com Installation and Operation Instructions for the following models: MR7CN Indoor 7” Recessed Ceiling housing, with network camera adapter brackets, clear dome MR7TN Indoor 7” Recessed Ceiling housing, with Network camera...
- Página 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE Do not block any of the ventilation openings.
- Página 3 LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARM INC. warrants this Product to be free from defectsin material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosuresand Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation /tour operation...
- Página 4 Electrical Specifications Content of Box MR7TN No power options provided. Power required for camera only. Power 24VAC Class 2 Power Supply Only English Tools Required: Phillips Head Screwdriver Ceiling Support Wires(18-24 Gauge Wire) Ningunas opciones de la energía proporcionaron. Energía requerida para la cámara fotográfica solamente.
- Página 5 11.125” Using the provided template, mark the A box cutter or jigsaw can be used for ceiling tile for the cutout. cutting the circle. • Un cortador o un rompecabezas de la caja se • Con la plantilla proporcionada, cortar el azulejo del techo puede utilizar para cortar el círculo.
- Página 6 Support Arms Rotate Support Arms Rotate Mounting Holes Base Bracket Support Arm Holes The camera may be mounted on either side of the With the bottom flange pressed against the ceiling, tilted part of the camera bracket. rotate support arms to the outside. Tighten the support arm screws.
- Página 7 Axis 213 (3) #8x3/8” Mounting Plate ½" Captive Screw 1" 2" MOUNTING HOLE MOUNTING HOLE Install the camera to the mounting plate with (2) #10 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
- Página 8 Axis 215 1" 1" Mounting Mounting Holes Holes 2" Install the camera to the mounting plate with (4) #8 screws and lock washers provided. Place (3) #8x3/8” screws on the spacers and align the mounting slots. Slide on plate and camera then secure. •...
- Página 9 Axis 231-232D ADD SPACERS AND SCREWS Attach the connection module as shown. Attach this assembly to the housing using This is what the typical path of illumination will look like with the setting at 30 degrees. (1) 6-32x3/8” screw and star washer. •...
- Página 10 Axis 233D Install (4) 1/2” spacers (from bracket) to base bracket. mount camera bracket and install (4) additional 1/2” spacers to camera bracket. • Instale (4) los espaciadores del 1/2"(del soporte) para basar el soporte. monte el soporte de la cámara fotográfica e instale (4) los espaciadores adicionales del 1/2"al soporte de la cámara fotográfica.
- Página 11 Canon VB-C50IR ½" 2539 Mounting Plate Mounting Captive Hole Screw 1" 2" Mounting Hole Mount the camera to the 2539 plate using the provided hardware. Place (3) 8 x 32 x 3/8 Phillips head screws on the top of the spacer as shown above. Slide plate in and secure. •...
- Página 12 Elmo PTC-200C Captive (3) 8 x 32 x 3/8 Screw 2539 Mounting Plate ½" Mounting Hole 1" 2" Mounting Hole Place the camera onto the quick release bracket using the (4) metric 3M Phillips head screws provided. Place the screws on the spacers. Slide on the plate and camera then secure. •...
- Página 13 Elmo PTC-400C ½" 2539 Mounting Plate Mounting Hole Quick release plate 1" 2" Mounting Hole Attach quick release bracket to mounting plate using (4) #8 screws and star washer. Complete assembly as shown, then secure camera to the quick release plate. •...
- Página 14 JVC VN-C30U 2539 Mounting Plate ½" 2" Mounting Hole Remove the camera plate and mount to the bracket using the (3) metric 3M Phillips head screws. Reattach plate back to the camera. Place the screws on the spacers. Secure the plate and camera. •...
- Página 15 JVC VN-C655U ½" 1" Mounting 2630 Mounting Hole Plate Place the camera on the bracket with the (4) phillips head screws. Use (4) 1” spacers and (4) 1/2” spacers provided. Place the screws on the spacers. Slide on the plate and camera then secure. •...
- Página 16 Pixord 261/262 ½" 2630 Mounting Mounting Hole Plate Install camera to the bracket with (3) 8x32x.5” flat head screws, nuts and washers. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. • Instale la cámara fotográfica al soporte con (3) los tornillos, las tuercas y las arandelas principales el 8x32x.5"planos. Coloque (3) 8x32x3/8"screws en los espaciadores.
- Página 17 Sony SNCRZ30 2" 2539 Mounting Mounting Hole Plate Attach bracket with (1) 1/4x20 bolt, washer and lock washer. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. • Una el soporte con (1) el perno 1/4x20, la arandela y la arandela de cerradura. Coloque (3) 8x32x3/8" screws en los espaciadores.
- Página 18 Toshiba IK-WB21A Mounting Hole 1" 2" 2539 Mounting Mounting Hole Plate Remove camera bracket and attach to the 2539 plate with (4) 8x32x3/8 bolts and star washers. Place (3) 8x32x3/8”screws on the spacers. Slide on the plate and camera then secure. •...
- Página 19 Replacement Parts List Part Number Description RPMR7010 MR7 TOP HOUSING ASSEMBLY MR7CN MR7TN RPMR7020 MR7 SUPPORT ARMS KIT (SET OF 3) RPNET04 NETWORK BASE BRACKET REPLACEMENT CAPSULE FOR MR7T RCMR7T HOUSING REPLACEMENT CAPSULE FOR MR7CL RCMR7C HOUSING, NO SILKSCREEN, LINER...
- Página 20 Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second- to-none in the security industry. Should a problem arise, rest assure that Videolarm stands behind its products by offering some of the most impressive warranty plans available: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on all camera systems (SView, QView, Warriors), and InfraRed Illuminators.