Husqvarna 230iB Manual De Usuario página 8

• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the
risk of electric shock.
• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of a RCD
reduces the risk of electric shock.
Personal safety
• Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
• Keep bystanders away.
• This appliance is not intended for use
by person (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety. Children
should be supervised to ensure that they do
not play with the appliance.
• Never allow children or people unfamiliar
with these instructions to use the product.
Local regulations may restrict the age of the
operator.
• Keep unauthorised persons at a distance.
Children, animals, onlookers and helpers
should be kept outside the safety zone of 15
m (50 ft.). Stop the machine immediately if
anyone approaches.
• Store the equipment in a lockable area so that
it is out of reach of children and unauthorized
persons.
8
• Do not operate the machine on a paved or
gravel surface where ejected material could
cause injury.
• While operating the machine always wear
substantial footwear and long trousers. Do
not operate the machine when barefoot or
wearing open sandals. Avoid wearing clothing
that is loose fitting or that has hanging cords
or ties.
• Do not wear loose clothing or jewellery that
can be breathed into the air inlet. Keep long
hair away from the air inlets.
• Never use the machine if you are tired, if
you have drunk alcohol, or if you are taking
medication that could affect your vision, your
judgement or your coordination.
• Wear personal protective equipment. See
instructions under the heading "Personal
protective equipment".
• Always remove the battery when passing the
machine to another person.
• Keep in mind that it is you, the operator that
is responsible for not exposing people or their
property to accidents or hazards.
Power tool use and care
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
• Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool´s operation. If
damaged, have the power tool repaired before
1516 - 008 - 29.11.2023