Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 17 Friday, December 15, 2023 2:25 PM
8
Reverse the
upper hinge assembly and
l
hinge filler.
• Carefully lift
the upper hinge assembly-
l
inner top lock rod (on the left) out of the
outer door frame. Rotate the
assembly - inner top lock rod 180 degrees
and install it on the upper right side of the
outer door. You will need to press firmly to
install the hinge assembly.
• Now rotate the
n
and install it on the upper left side of the
door.
9
Reinstall the
top lock rod holder using 2
g
screws removed in step 6.
10
Reverse the
lower hinge bracket and
i
hinge assembly.
1) Remove the screw from the
hinge bracket (on the right) and lift the
n
upper hinge
l
hinge filler 180 degrees
k
lower
i
INSTALLATION
hinge bracket out. Set it aside. Remove
the two screws from the
assembly on the bottom left and lift the
hinge assembly out.
2) Rotate the
lower hinge assembly 180
k
degrees and install it on the right side
using the two screws removed in a
previous step.
3) Flip over the
lower hinge bracket and
i
release the tabs on the back locking the
hinge filler to the hinge bracket.
e
4) Rotate the hinge filler 180 degrees and
snap it back onto the front of the hinge
bracket facing in the opposite direction.
17
lower hinge
k
Publicidad
