LG DL 840 E Serie Manual Del Propietário página 42

en-us_main.book.book Page 42 Friday, December 15, 2023 2:25 PM
42 SMART FUNCTIONS
Update your product
You can update your product with new features
through the LG ThinQ app.
• When new features are available, an update
notification will appear on the control panel as
below when you turn on the product.
• After the update, the product function may
change from what is indicated in the user
manual.
1
Once you get an update notification, it will
also send an update notification to your
smartphone.
2
Tap the update notification on your
smartphone to enter Feature Updates screen
in the LG ThinQ app.
3
Once you enter Feature Updates screen,
select the new features and tap the update
button.
• The progress of the update can be checked
on the product's control panel.
• Do not unplug the power plug of the
product during the update, as it will
interrupt the process.
4
After the update, to change the detailed
settings of the updated features, refer to the
guide within the LG ThinQ app.
Wireless LAN Module Specifications
Frequency 2412 - 2462 MHz
Range
Output Power < 30 dBm
(Max)
FCC Notice
The following notice covers the transmitter
module contained in this product.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference
and
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user's authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-
located or operating in conjunction with any other
antenna or transmitter.
This equipment should be installed and operated
with a minimum distance of 20 cm (7.8 inches)
between the antenna and your body. Users must
follow the specific operating instructions for
satisfying RF exposure compliance.
Open Source Software Notice
Information
To obtain the source code that is contained in this
product, under GPL, LGPL, MPL, and other open
source licenses that have the obligation to disclose