Descargar Imprimir esta página

LG WM4100H A Serie Manual Del Propietário página 31

Ocultar thumbs Ver también para WM4100H A Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

us_main.book.book Page 31 Friday, July 30, 2021 11:23 AM
• Do not attempt to override the door lock
mechanism or reach into the washer during a
steam cycle. Steam can cause severe burns.
Fresh Care
Use this function when you will not be able to
unload your clothes immediately after the wash
cycle ends.
• The drum will tumble periodically for up to 19
hours to prevent wrinkles.
1
Turn on the power.
2
Select the desired cycle.
3
Press and hold the Steam button for 3
seconds to select this function.
4
Press the Start/Pause or Power button at any
time to unload laundry.
Using the Pre-wash Option
This option adds a pre-wash (for about 15 - 17
minutes) for improved cleaning of heavily soiled
or stained clothing.
NOTE
• If you select Pre-wash after putting the
detergent directly in the drum, the detergent
may be washed away, reducing the washing
performance.
Remote Start
Use a smartphone to control your washer
remotely.
• For more information, see SMART FUNCTIONS
in this manual.
Delay Wash
Once you have selected the cycle and other
settings, press the Delay Wash button to delay the
start of the wash cycle.
• Each press of this button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Wi-Fi
When the washer is connected to a home Wi-Fi
network, the
icon on the control panel is lit.
f
• To connect the washer to the LG ThinQ
application, press and hold the Delay Wash
button for 3 seconds.
Add Item
Use this function to add garments or remove
foreign objects like coins or keys after the cycle has
started.
1
Press the Add Item button while the wash
cycle is running.
• The cycle pauses and the door unlocks.
2
Open the door, add garments or remove
foreign objects, and close the door.
3
Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
WARNING
• Do not attempt to force the door to open when
locked. Doing so could result in damage to the
appliance, malfunction, or personal injury.
NOTE
• If the water level and temperature are safe, the
door lock LED turns off and the door unlocks
once the wash movement has stopped.
• If the water level is too high, the door will not
unlock, and this function cannot be used.
• If the temperature in the drum is higher than
113 ℉ (45 ℃), a short warning chime sounds and
this function is not allowed for safety.
• This function is disabled during the Tub Clean
cycle.
• To preserve wash performance, wash time may
be extended depending on when garments are
added to a cycle.
OPERATION
31

Publicidad

loading

Este manual también es adecuado para:

Wm4200h a serie