Publicidad
ENGLISH
ITEM
DESCRIPTION
A
Lower front half beam (small)
B
Rear half beam
H1
Side plank
Start construction with the 5 lower planks: the two lower front planks (part A) and the rear
plank (part B) and the first two side planks (part H1), with the plank lugs facing upwards.
Assemble to form a base frame.
To install the planks, it's best to use a rubber hammer and, above all, an assembly aid. Place
the wedge on the tongue of the plank and tap with the hammer until the plank is driven in all
the way.
The concrete slab must be perfectly straight. Check this with a spirit level.
DIMENSIONS (MM)
28 x 48 x 1265 mm
28 x 48 x 3980 mm
28 x 95 x 2980 mm
29
QTY
2
1
36
Publicidad
