amig REMOCK LOCKEY PRO Manual De Usuario página 4

Congratulations, you are now the owner of Remock Lockey Pro. Our commitment is to provide the highest level of satisfaction, and therefore the Invisible
Lock will protect you like no other device because of the lack of visible and accessible elements from the outside. Feel secure wherever you are!
Remock Lockey Pro is the definitive solution to prevent burglaries, because most of the cylinders classified as "security", that you can find in the market,
are vulnerable to openings carried out using picks, magic keys, bumping, drilling and extraction tools. If you suffer a burglary performed using some of
these methods, you may have problems receiving compensation of the insurance coverage for burglary.
This product has been rigorously tested for EMC (Electro Magnetic Compatibility) and fulfills all required safety standards, being approved for CE and
FCC compliance. Before beginning the installation and / or use and in order to avoid possible risks and keep its operation under the conditions described,
please read carefully all the sections and the safety notes. The installation instructions of this user guide may be supplemented by the video that you
find in our website.
Please read carefully
• Before performing any work, any person who works with Remock Lockey Pro must have read and understood this User Guide. A basic requirement to protect against any kind
of danger, to avoid malfunction and to handle the unit correctly and safely, is to know and understand the contents of this User Guide. If after reading this document you have
questions, consult a professional.
• When the LED flashes and sounds different to the usual, please replace the batteries immediately according to the instructions on the page 17.
• Used batteries should be changed by new AA alkaline batteries. Always replace the full set of batteries, never mix old batteries with new ones. Mixing old and new batteries can
cause a malfunction of the lock.
• Be sure to the correct placement of the batteries according to the + and -. Otherwise, you may cause a fire or explosion.
• Replace the batteries with new ones when the lock will not be used for a long period of time to prevent possible problems. If you do not know the period of absence, remove the
batteries.
• Handle with care. Can be damaged by impact or fall. Do not strike or dip the lock. If the device comes into contact with water, run the risk of electric shock, cause a fire or
malfunction of the device.
• It is recommended that the entire system be completely tested regularly.
• Indoor use only.
• Depending on the type of door, you may need to go to a locksmith or to use special tools.
• The wood is a material which by nature is very sensitive to changes in temperature and / or humidity. This causes solid wood doors are likely to deform in direct contact with the
sun or humidity, which could hinder or even prevent the right lock operation.
• Do not install the lock in a place with high humidity, dust or smoke in order to prevent fire and electrical shock.
• Do not install the lock next to flammable materials.
• Keep the remote controls, the lock and the batteries out of the reach of children.
• Link or delete the remote controls as described on page 14. Any mistake may cause malfunction of the lock.
• It is advised to keep a remote control unit in a trusted place for emergencies.
• Never disassemble the lock body.
• Use the manual opening system and the redundant opening system exclusively for emergencies.
• Clean the surface of the lock with a clean, dry and soft cloth to prevent damage and corrosion. Do not clean with water, alcohol or other chemicals.
• At the end of the useful life, the unit and its components must be deposited at a collection point or recycled according to local regulations.
• The packing material and consumer products (eg. Batteries) must be removed and / or recycled according to local regulations.
4