Publicidad
Idiomas disponibles
Idiomas disponibles
REGISTERING (PAIRING) OF P-456/8 IN EXTA LIFE
You need to register the remote control in the EXTA LIFE system to:
● remotely bind remote control buttons to specific EXTA LIFE receivers (with-
out physical access to the receivers);
● bind specific button(s) to playback scene(s);
● program a remote control button as a condition to execute a logical function.
To register the remote control in the EXTA LIFE system, connect the EXTA
LIFE controller and install the EXTA LIFE mobile app. The transmitters are
saved as registered in the EXTA LIFE system only if they have been success-
fully paired with the EXTA LIFE controller. Procedure:
1. Launch the EXTA LIFE mobile app and open the Devices screen.
2. Select the Transmitters tab and press the "+" button
the remote controls. The discovery takes up to 60 s. You can terminate it
earlier by pressing Stop
button on it while the discovery is active. If the remote is in range of the
EXTA LIFE controller, it will appear on the
on-screen list with its default icon and name,
which is the remote control model (P-456/8)
with its six-digit ID in the suffix. You do not
need to stop the discovery to register more
than one pilot.
3. Once the discovery has been completed or
stopped manually, check the selection boxes
next to the discovered remote controls on the
list to choose those you want to pair with the
EXTA LIFE controller. You can check more
than one remote control with the selection
boxes. You can use the pop-up menu to mod-
ify a remote control's name before pairing.
4. Press PAIR
controls. The selected remote controls will
be paired with the EXTA LIFE system after a
short moment and appear in the Transmitters
tab
.
5. A default icon is assigned to each paired re-
mote control.
6. You can pair one remote control at a time;
once PAIR has been pressed, you can assign
a new name to the remote control. When pair-
ing more than one remote control at the same
time, they will be saved under their default
names.
7. You can also modify the default names of
the P-456/8 remote controls once they have
been paired.
8. Only when paired can the remote control be
used to set up the EXTA LIFE system con-
figuration (remote assignment of receivers,
scenes or logical functions).
. To discover a remote control, press any control
to pair the selected remote
to start discovering
Publicidad
