Zamel exta life P-456/8 Manual Del Usuario página 8

OPERATING CONSIDERATIONS
STANDARD FUNCTIONALITY
● The standard functionality enables wireless operation of EXTA LIFE system
receivers.
● The function of each remote control button depends on the operated receiv-
er type the button has been assigned to during remote control programming
(example: if paired to an ROP-22 receiver, the buttons can be used to turn
lights on and off; if paired to an SRP-22 controller, the buttons can open and
close roller shutters).
● Individual buttons can be assigned to more than one EXTA LIFE system
receivers.
● If a single remote control is to operate more than one receiver, the recom-
mended button operation mode is On/Off (example: button (1) is the On
command, button (2) is the Off command, or vice versa).
● When operating roller shutters with the P-456/8 remote control (paired to an
SRP-22), two buttons are required (one for the Up command, and one for
the Down command). The remote control can operate up to 4 roller shutters
independent of each other. The remote control buttons can work in the local
or central (group) control mode.
● You can assign the remote control buttons to receivers with different operat-
ing modes, the range of which depends on the receiver type (details see the
applicable EXTA LIFE receiver user manuals).
● If the remote control buttons are programmed to a time-mode receiver, each
button can be assigned with a custom time value from 1 s to 18 hours.
● You can delete specific button bindings from the receiver memory.
FUNCTIONAL WITH EXTA LIFE CONTROLLER AND APP
Functionalities enabled with the EXTA LIFE controller and app:
● Remote binding of individual remote control buttons to specific controllers
● Program remote control buttons to playback scenes or as conditions to ex-
ecute logical functions
● Monitor the transmitter's battery life.
These functions are enabled only on a remote control paired with an EXTA
LIFE controller (by registering the remote control in the EXTA LIFE system).
DEVICE COOPERATION AND TRANSMISSION RANGE
RNK-22
RNK-24
P-457/2
P-457/4
P-456/8
P-456/36
EFC-01
CAUTION! The transmission range is specified to open areas, which are perfect transmission condi-
tions without obstacles. If there are the following obstacle types between the transmitter and the
receiver, expect the transmission range to be reduced by 10 to 40% for brickwork, 5 to 20% for wood
and drywall, 40 to 80% for reinforced concrete, 90 to 100% by metal, and 10 to 20% by glass. The trans-
mission range is also adversely affected by overhead and underground high-voltage power lines and
GSM transmitter bases located near the devices.
ROP-21 ROP-22
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
330 m 350 m
RDP-21 SRP-22
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
280 m 300 m
330 m 350 m
EFC-01
350 m
350 m
350 m
350 m
350 m
350 m
-