Craftsman 126.32561 Manual Del Operador página 30

LOWER BLADE GUARD (Fig. V)
NOTE: Lower blade guard operation is
automatic. The blade guard will deploy and
completely cover the blade as the Cutting
Head is allowed to rise to its upper position.
To turn the LASER 'Off' slide the switch
towards the 'O' position. (Fig. W)
(Fig. W)
(Fig. V)
THE LASER GUIDE
Your saw is equipped with a Laser cutting
guide using a Class 11 laser beam. The laser
beam will enable the operator to preview the
path of the saw blade on the stock to be cut
before starting the saw. This laser guide is
powered by transformed alternating current
supplied from the mains power source.
The saw must be connected to the power
source and the laser on/off switch must be
turned 'On' for the laser line to show.
NOTE: All adjustments for the operation of
the laser guide have been completed at the
factory.
If you have any problems or questions
regarding the laser guide, call the Sears
Service Center.
IA WARNING I
Laser is radiated when the laser guide is
turned on. Avoid direct eye contact into
the laser beam. Always unplug the saw
from the power source before making any
adjustments.
Laser Warning Label:
Max output <1 mW 630-670nm.
Complies with 21CFR 1040.10 and 1040.11.
To turn the LASER 'On' slide the LASER On/
Off switch towards the '1'position.
30