Publicidad
Idiomas disponibles
Idiomas disponibles
1
INTRODUCTION
North's FP540 Series Rope Grab is a simple, cost effective solution for fall arrest
requirements. Its unique feature is that its cam lever is sprung to allow the cam to
engage the lifeline even if the user grabs the cam lever (forcing it open) it the event of
a fall. This eliminates the so-called "death grip fall" associated with regular rope
grabs.
The FP540 Series Rope Grab is designed for use in vertical applications of 16mm
(5/8") approved synthetic rope only. It can be adjusted up or down the lifeline with
little effort. Should a fall occur, the rope grab will lock onto the lifeline thus arresting
the fall, and suspending the user. It can be purchased with attached lanyard or shock
absorber, or without a lanyard.
The North FP540 Series Rope Grab is constructed of high strength materials, and
plated steel against corrosion for long lasting service.
1.1
IMPORTANT INFORMATION
This Operating and Maintenance Instruction Manual contains important information
and must be completely read and understood by all persons who may use, inspect
for use or maintain the equipment.
The rope grab must therefore only be used or maintained by persons who understand
the instructions contained in this manual and have been adequately trained in its use
and inspection.
All the warning and product compatibility requirements listed in this manual must be
adhered to, to ensure that the rope grab functions properly.
1.1.1 TERMINOLOGY
Warnings, cautions and notes used in this manual have the following significance:
Procedures and techniques which, if not carefully followed, will
expose the user to the risk of serious injury or death.
CAUTION
Procedures and techniques which,
if not carefully followed, will result
in damage to the equipment.
Qualified Person
OSHA defines a qualified person as one with a recognized degree or professional
certificate and/or extensive knowledge and experience in the subject field who is
capable of design, analysis, evaluation and specifications in the subject work, project
or product.
Three Strand or Three Twist Rope
Refers to a rope construction type where parallel rope filament lays (numbering 3) are
twisted together to form a strong rope. This is a rope style most users would be
familiar with.
Kernmantle Rope
Refers to rope construction where the inner filament strands are parallel to one
another (the kern) and are enclosed in braided jacket of similar material (the mantle).
These ropes are typically smooth in outer finish and have low stretch characteristics.
WARNING
Procedures and techniques that are
considered important enough to
emphasize.
3
NOTE
E
N
G
L
I
S
H
Publicidad
