Retekess T130S Manual Del Usuario página 6

2.Manual Set Receiver Channel ID
A.In power off mode, press and hold (
press the ( ) button with your left hand to turn on the receiver .
B.Release the (
C.Release the (
D.Press ( ) or (
E.Press ( ) button to confirm.
Precautions
When the device is not used for a long time, please charge the device every 3
months to prevent the battery from being damaged. (The built-in lithium battery
will be damaged due to over-discharge)
Precautions for using the charging box
1.Working Voltage: AC90V-250V.
2.Please take out the foam from the charging box before charging, and keep the
cover of the charging box open when charging.
3.It takes about 4 hours to fully charge.
Specifications
Transmitter
1 Frequency Range
2 Channels
3 Working Voltage
4 Output Power
5 Mic /Aux input
6 Frequency Response
7 SNR
8 Image rejection ratio
9 T.H.D
10 Operating Range
11 Battery Capacity
12 Battery Run Time
13 Weight
14 Size
) button when the receiver is powered on.
) button when the channel ID changes on the screen.
) button to select the desire channel ID.
195-216MHz
49CH
DC 3.7V
18dBm
3.5mm
50-18000Hz
80dB(Typical)
≥90dB
<0.3%
100m（line of sight）
4200mAh
About 20 hours typical
120g（without accessories）
103*61*25.8mm（without antenna）
) button with your right hand, then
3