Symbols Used In The Manual; Purpose And Content Of The Manual; Target Group; Storing The Use And Maintenance Manual - Hillyard Trident BP6V Manual De Uso

The descriptions contained in this document are not binding. The company therefore reserves the right to
make any modifications at any time to elements, details, or accessory supply, as considered necessary
for reasons of improvement or manufacturing/commercial requirements. The reproduction, even partial,
of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images
are shown as reference only and are not binding as to the actual design or equipment.

SYMBOLS USED IN THE MANUAL

Symbol of the open book with i:
Indicates the need to consult the instruction manual.
Symbol of the open book:
Tells the operator to read the user manual before using the appliance.
Covered place symbol:
The operations preceded by this symbol must always be carried out in a dry, covered area.
Information symbol:
Indicates additional information for the operator, to improve the use of the device.
Warning symbol:
Carefully read the sections preceded by this symbol meticulously following the instructions
indicated for the safety of the operator and the device.
Symbol indicating the compulsory use of protective gloves:
Indicates that the operator should always wear protective gloves, to avoid the risk of serious
injury to his hands from sharp objects.
Recycling symbol:
Tells the operator to carry out the operations in compliance with environmental regulations
in force in the place where the appliance is being used.
Disposal symbol:
Carefully read the sections marked with this symbol for disposing of the appliance.

PURPOSE AND CONTENT OF THE MANUAL

The aim of this manual is to provide customers with all the information needed to use the appliance in
the safest, most appropriate and most autonomous way. It includes information concerning technical
aspects, safety, operation, appliance downtime, maintenance, spare parts and scrapping. Operators and
qualified technicians must read the instructions in this manual carefully before carrying out any operation
on the appliance. If in doubt about the correct interpretation of instructions, contact your nearest Customer
Service Centre to obtain the necessary clarifications.

TARGET GROUP

This manual is aimed at operators and qualified technicians responsible for appliance maintenance.
Operators must not perform operations that should be carried out by qualified technicians. The
manufacturer is not liable for damages resulting from failure to comply with this veto.

STORING THE USE AND MAINTENANCE MANUAL

The Use and Maintenance Manual must be stored in its special pouch close to the appliance, protected
from liquids and anything else that could compromise its legibility.

ON DELIVERY OF THE APPLIANCE

When the machine is delivered to the customer, an immediate check must be performed to ensure all
the material mentioned in the shipping documents has been received, in addition to verifying that the
equipment has not been damaged during transportation. If this is the case, the shipping agent must
ascertain the extent of the damage at once, informing our customer service office. It is only by prompt
action of this type that the missing material can be obtained, and compensation for damage successfully
claimed.

INTRODUCTORY COMMENT

Any type of equipment can only work properly and effectively if used correctly and kept in full working
order by performing the maintenance operations described in the attached documentation. You should
therefore read this instruction manual carefully, consulting it again if issues arise while using the machine.
If necessary, remember that our assistance service (organised in collaboration with our dealers) is always
available for advice or direct intervention.

IDENTIFICATION DATA

For technical assistance or to request spare parts, always give the model, the version and the serial
number on the relative rating plate).

TECHNICAL DESCRIPTION

The TRIDENT BP6VLI is a vacuum cleaner which uses the vacuum created in the collection tank by
the fan (enabled by the electrical motor) to pick up dust and dry solid elements measuring up to 2 cm
at ambient temperature, using accessories in contact with the floor and furnishings. The vacuum hose
channels the air into the collection tank, where the dust and solid residues are trapped by filters. The
appliance must only be used for this purpose.

INTENDED USE

This appliance is designed and built to be used by a qualified operator to clean (by vacuuming solid,
dry elements) smooth, compact flooring in the commercial, residential and industrial sectors, in proven
safety conditions.
ATTENTION: the appliance is not suitable for use in the rain, or under jets of water.
IT IS FORBIDDEN to use the appliance for picking up dangerous dusts or inflammable liquids in
places with an explosive atmosphere. In addition, it is not suitable as a means of transport for
people or objects.
Operator cooperation is paramount for accident prevention. No accident prevention programme can be
effective without the full co-operation of the operator who is directly responsible for machine operation.
The majority of occupational accidents that happen both in the workplace or whilst moving are caused by
failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee
against accidents and is fundamental in order to implement any prevention programme.

RATING PLATE

The serial number plate is located at the rear of the vacuum cleaner, and indicates the general
characteristics of the appliance, in particular the appliance's serial number. The serial number is a very
important piece of information and should always be provided together with any request for assistance
or to purchase spare parts.

TECHNICAL DATA

Electrical characteristics of the vacuum motor
Type of vacuum cleaner
Number of vacuum motors
Vacuum
Air flow rate
Collection tank capacity
Tank material
Appliance dry weight (without battery)
Battery weight
Appliance ready-to-use weight

Battery type

Electrical characteristics of the battery
Dimensions (length x height x depth)
Accessories diameter
Sound pressure level (ISO 11201)
Uncertainty K
pa
BATTERY TYPE
To power the appliance, use only the battery supplied in the package or by a specialised technician.
OTHER BATTERY TYPES CANNOT BE USED. The appliance is powered by a lithium-ion battery. The
battery compartment can accommodate a single battery slot at 36.5V.

BATTERY MAINTENANCE AND DISPOSAL

For maintenance and recharging, respect the instructions provided by the battery manufacturer. THE
BATTERY IS CLASSIFIED AS DANGEROUS WASTE, AND AS SUCH, IT IS COMPULSORY TO TAKE
IT TO AN AUTHORISED SERVICE CENTRE.
For good battery maintenance, follow these indications:
• Do not attempt to open the battery for any reason whatsoever. Avoid any contact with the liquid that
seeps out of damaged batteries. If necessary, rinse the area of skin which came into contact with the
liquid in water; in case of contact with eyes, rinse thoroughly and seek medical advice.
• Do not let the battery get dirty or wet.
• The battery must not be exposed to excessive heat (e.g. rays of sunshine, flames, etc.). Do not leave
the battery in places where the temperature could exceed 40°C.
• The battery contacts must not touch metal parts, to avoid any risk of short-circuits.
• The battery must be kept far from metal objects, to avoid any risk of short-circuits.
• Do not throw the battery into the fire.
• Do not throw the battery away with domestic waste; respect the disposal regulations in force in the
country where the appliance is used.
For good battery charger maintenance, do as follows:
• Always recharge the battery at a room temperature between 10°C and 40°C. Recharge the battery
using the power supply unit supplied with the appliance. Do not attempt to recharge damaged
batteries.
• Only use the power supply unit delivered with the appliance to recharge the battery supplied by the
manufacturer or by a specialised technician. Other batteries could explode, causing harm to people
and damage to property.
• The voltage rate indicated on the plate in the battery charger must correspond to the mains voltage.
• Do not use the battery charger in potentially explosive environments.
• The battery charger contacts must not touch metal parts, to avoid any risk of short-circuits.
• Never attempt to recharge the primary cell batteries: danger of explosion.
• Never attempt to recharge damaged batteries.
• Every time you want to use the battery charger and the battery, first make sure they are not damaged.
Do not use damaged appliances. Have faulty parts repaired by the staff of a technical assistance
centre.
• Have any faulty supply wires replaced immediately.
• Do not let the power supply unit get dirty or wet.
• Do not open the power supply unit.
• Do not connect the power supply unit to probes.
• The batteries must be clean and dry when they are inserted in the battery charger. Do not use the
battery charger if the battery holder support is dirty or wet.
ATTENTION: the battery charger must only be used in a covered place.
ATTENTION: read this manual before using the appliance or carrying out any maintenance work.
ATTENTION: if the battery is handled in the wrong way, it could explode or release acids. This
could cause burns and injuries to the people nearby.
ATTENTION: when the battery is run down or damaged, respect the disposal regulations in force
in the country of use.
8

SAFETY

TRIDENT
U.M. [SI]
BP6VLI
V / W 36 / 230
Dry
1
kPa 8
ft /min 36,49
3
gal 1,59
HDPE
lb 12,13
lb 3,09
kg 15,21
Li-ion Technology
V - Ah 36 - 5.2
in 10,43x24,76x8,78
in 1 3/8
dB (A) 60
dB (A) 2